| |
At only 1RU and 2RU, Valere’s Mini DC Power
Systems offer an unprecedented combination of high-power and small size
for telecommunications, embedded, datacenter or enterprise applications.
The Mini DC power family of products are innovative, flexible, full-featured
power systems with a current output of up to 400 amps. Power levels range
from 500W to 10,000W. Advanced controller and battery back-up management
capabilities are also available.
 |
|
 |
 |
|
| |
-
Enterprise Networking
and Computing
Valere’s Mini DC Power Systems provide the needed voltage for
Blade servers, voice over IP/power over Ethernet and other Enterprise
data center equipment with industry leading reliability and 35% less
heat emission.
-
Business Communications Services
The deployment site of CPE is always a great unknown. Valere’s
Mini DC Power Systems provide the ultimate flexibility for these applications,
with current levels that span from 10 to 400 amps.
-
Remote Broadband Deployments
With its industry-leading footprint and 4X power density, Valere’s
Mini DC Power Systems can go where no other power system will fit and
still leave room for other revenue generating equipment.
-
Wireless Network Applications
The Mini DC Power System’s multiple outputs – 12V, 24V,
and 48V – provide a unique solution to powering multiple overlay
networks, 2-way radio, and paging systems.
|
|
|
More Room for Revenue Equipment — Valere’s
Mini DC Power Systems require only 1U or 2U of rack space, emits 35%
less waste heat, and provides up to triple the output power.
Reduced Installation and Maintenance
Costs — Powerful system controller and elegant product
design make this a simple to install and understand system.
Better Quality of Service — 93%
efficiency, > 1,000,000 hrs MTBF, NEBS Level 3
compliance, and intelligently designed distribution all result in reliable,
trouble-free networks.
Network Interface Options
— With options for a NIC or 10/100 LAN with SNMP, Telnet,
and HTTP interfaces you can directly manage the power sub-system for
increased telemetry and faster time to market.
Scalable Solution — Start with 10
amps and grow to 400A in a single system!
|
|
| |
RECITIFIER MODULES
H SERIES RECTIFIERS
-
12V: 60A, 100A
-
24V: 50A
-
48V: 10A, 15A, 20A, 25A, 30A, 40A, 50A
|
ALARM AND CONTROL INTERFACES
User may select from one of the following alarm interfaces
depending on system configuration.
|
DIRECT INTERFACE CONNECTOR (HM Shelf only) |
- Direct user interface from system
shelf to each rectifier module
- Opto alarm indication of AC, DC, and
temperature status
- Access to I2C interface to each rectifier
- Optional
auxiliary outputs
|
| NETWORK INTERFACE CARD (NIC) (HM
or HK Shelf) |
- Network interface between power system and
host
- 10/100 LAN interface
- Webpage interface
- SNMP with full MIB support
- Telnet interface for scripting
- The NIC can be configured for one
or two shelf power systems
|
| TRIO (Thermal Relay Input/Output
Card) (HK Shelf only) |
- Can be used with or without NIC
- Provides 4 Form C alarm relays and 4 temperature probes
- If used without NIC
– 3 available alarms (DC Fail, AC Fail, and Fuse Alarm)
– Fourth alarm relay and temperature probes inactive
- If used with NIC
– 4 available alarms mappable through NIC
– Temperature probes active
|
| BC CONTROLLER FAMILY (HJ Shelf only) |
- Full telecom functionality
- Form C alarm relays
- Thermal compensation
- Remote and local data interfaces
– LAN, Modem, RS232 are all supported
- Connects up to two shelves
|
AUXILIARY OUTPUTS
|
12V independent bias output for system control
loads
|
|
|
|
INPUT SPECIFICATIONS
-
Universal AC: 90 to 180 Vac (rectifiers
up to 1250W)
-
High AC Only: 180 to 264 Vac (rectifiers > 1250W)
-
Power Factor: >.99 typical @ 230VAC,
full load
-
THD: Line Harmonica meet EN61000-3-2
|
OUTPUT SPECIFICATIONS
-
Noise: 20mV RMS, 10 Hz -20 MHz bandwidth
-
Regulation: +/- 1% over line, load, and
temperature
-
Efficiency: 93% for 48V units, 90% for
12V/24V unit
|
| TEMPERATURE RANGE |
|
|
MECHANICAL
DIMENSIONS
| WEIGHT |
- HM Shelf Assembly: 4.1kg (9lbs)
- HK Shelf Assembly: 4.54kg (10lbs)
- HJ Shelf Assembly: 8.17kg (18lbs)
- H Series Module: 2.7kg (6lbs)
|
| AIRFLOW |
Horizontal airflow. All units provide internal, temperature
controlled fan cooling
|
PROTECTION |
- Redundancy: internal “or”-ing protection
- ESD: EN61000-4-2,
level 4
- AC Surge: EN61000-4-4, EN61000-4-5, Level 4
|
AGENCY CERTIFICATIONS
-
TELCORDIA: NEBS Level 3 Compliant
-
UL: Canada/US UL60950/UL1801
-
VDE: EN60950
-
EMI/EMC: CISPR Class B conducted and radiated
10V/M radiated susceptibility
- CE mark meets 73/23/EEC and 93/68/EEC directives
|
|
|
