| |
The Valere Compact DC Power System is a fully configurable,
building block system designed to fit a wide range of power needs, from
outdoor plant to central office applications.
Utilizing our innovative architecture, the Modular
DC Power System can be optimized from 50 amps to 3,000 amps in single
or dual voltage configurations with support for DC/DC conversion.
 |
|
 |
|
|
| |
Wireless Base Stations
1,800A and 80 distribution points in a half height rack and up to
3,000A in a full rack configuration - this system will power
every 2G, 2.5G, 3G, GSM, GPRS, and PCS network build out.
-
Metropolitan and Wide
Area Networks
Not enough space in your remote facilities to build a robust network?
The Modular Plant is the ideal power system for these critically
important
network sites.
-
Modular Building Block Design
Designed to be customizable in a wide variety of combinations to
meet the needs of your applications ranging in size from 50 amps
to thousands of amps.
- Single and Dual Voltage Configurations
- Supports DC/DC Conversion
- Sophisticated Remote Management
|
|
|
More Room for Revenue Equipment
— Up to 1,800 amps of rectifiers, 35% less waste heat, and 80 distribution
points in a half height rack eases the space and thermal demands placed
on cramped locations.
Flexibility to Adapt — Highly
configurable and powerful system design for a simple to install and understand
system. Distribution designed to minimize cable congestion, simplify
wiring, and provide truly error-proof installations.
More Productive Workforce
— A powerful remote management interface through Ethernet, SNMP,
or Modem can make any workforce more productive.
Better Quality of Service
— 92% efficient, >1,000,000 hrs MTBF, and Advanced Battery Management
all result in reliable, trouble free networks.
|
|
| |
MODULAR POWER SYSTEM CONFIGURATIONS HALF HEIGHT RACK
-
Up to three distribution panels
-
Up to three power shelves
-
Up to 1200A of 48V DC
-
Up to 1800A of 24V DC
- Options for dual voltage (24/48V) power
-
May be mounted above system batteries
|
FULL HEIGHT RACK
-
Up to four distribution panels
-
Up to eight power shelves
-
Up to 3000A of 24V or 48V DC
|
MODULAR POWER SYSTEM COMPONENTS
X SERIES RECTIFIERS
-
24V: 100A, 150A
-
48V: 50A, 100A
|
| X SERIES DC/DC CONVERTERS |
- 24V/48V: 15A, 30A
- 48V/24V: 40A
|
MODULAR POWER SHELVES
MODULAR DISTRIBUTION PANELS
| 6RU tall modules for load and battery interfaces
|
|
|
|
AC INPUT VOLTAGE
RANGE
-
Single Phase AC: 180 to 264 Vac
-
Three Phase Delta:Up to 240 Vac nominal
-
Three Phase WYE:300 to 480 Vac nominal
-
Power Factor: >.98
loads above 60% full load
-
THD: Line Harmonics meet EN61000-3-2
OUTPUT SPECIFICATIONS
-
Noise: 20mV RMS, 10 Hz-20 MHz bandwidth
-
Regulation: +/- 1% over line, load, and
temperature
-
Efficiency: 92% for 48V units, 90% for
24V unit
-
Polarity: May be configured for positive
or negative
|
TEMPERATURE RANGE
-
-40°C to +85°C storage
-
-40°C to +65°C operating
|
CONTROL AND COMMUNICATIONS
-
Full graphic, multi language front panel
display
-
Full battery float/boost/equalize/thermal
control
-
Four external temperature probes and one
internal sensor
-
Battery recharge and system current limit
-
Six programmable form-C relays
-
Up to four external, programmable alarm
inputs
|
OTHER OPTIONS
DIMENSIONS
-
Height: standard 2133.6mm (7') rack
height or shorter depending on rack
-
Width: 584.2mm (23") (rack mounted)
-
Depth: 533.4mm (21") (rack mounted)
|
WEIGHT
-
Actual weight depends on installed components
-
Full height relay rack 45.4kg (100lbs)
-
Power Shelf 9.8kg (21.5lbs)
-
Distribution Module 22.0kg (48lbs)
-
X Rectifier: 6.8kg (15lbs)
|
AGENCY CERTIFICATIONS
-
TELCORDIA: NEBS Level 3, NRTL Certified
-
UL: Canada/US UL60950/UL1801
-
VDE: EN60950
-
EMI/EMC: CISPR Class B conducted and radiated
10V/M radiated susceptibility
|
|
|
