| |
-
3A/3B Charger Replacement
Tired of mining old cabinets and hoarding fossilized 3A/3B
chargers? Valere’s replacement products offer N+1 redundancy,
floating battery architecture, battery temperature compensation,
and additional years of trouble free operation.
-
Broadband Service Deployments
Instead of dropping in new or adjunct cabinets to increase your served
DSL footprint, simply replace your existing SLC96 or SLC5 power system
with Valere’s SLC Power Upgrade which enables additional cabinet
space and power capacity.
-
CEV Rack System Upgrade
Valere power upgrades for SLC96 and SLC5 also extend into CEV and rack
applications. Plenty of power, distribution, and ringing to deploy
advanced high speed services from any location.
|
|
|
More Room for Revenue Equipment — Up
to 40 amps of output current, 35% less waste heat, connections for 4
SLC channel banks, dual 100VA ring generators, and extra output connections
for additional battery or load panels.
Reduced Installation and Maintenance
Costs — Directly replace existing SLC power equipment
without having to modify any of the cabinet wiring. Complete kits
are available for 36, 51, and 80 cabinets, as well as for rack based
systems. These kits contain all required components, wire harnesses,
and installation procedures to complete the work in less than an hour.
Better Quality of Service — 92%
efficient, >1,000,000 hours MTBF, N+1 redundant, floating battery
connections, and Advanced Battery Management all result in reliable,
trouble free networks.
|
|
| |
OUTPUT SPECIFICATIONS
V SERIES RECTIFIERS
- 20mV RMS, 10 Hz -20 MHz bandwidth
|
REGULATION |
- +/- 1% over line, load, and temperature
|
CONNECTORIZATION |
- Exactly matches SLC96 and SLC5 channel banks
|
INPUT SPECIFICATIONS
AC RANGE |
- Universal Line, 90 to 264 Vac
|
POWER FACTOR AND THD
|
|
OPERATIONAL AND ENVIRONMENTAL
EFFICIENCY |
|
|
TEMPERATURE RANGE |
- -40°C to +75°C operating
- -40°C to +85°C storage
|
SYSTEM COMPONENTS
3V POWER SHELF |
- Replaces one or two 3A/3B power unit
- Compatible with existing 1A/1B panels or 1V upgrade panel
|
1V2 DISTRIBUTION PANEL |
- Interconnect for up to four SLC96 channel banks
- Provides for Fault Locate, Order Wire, and Test
Trunk features
|
|
|
|
5V POWER SHELF AND 5V2 DISTRIBUTION PANEL
- Powers up to four SLC Series 5 channel banks
- Provides for Fault Locate, Order Wire, and
Test Trunk features
|
8V DISTRIBUTION AND RING PANEL
- Interconnect and redundant ring generation
for up to three SLC96 or SLC Series 5 channel banks.
|
R100A RING GENERATOR
- Redundant ring generator compatible with SLC power systems
|
WEIGHT
|
|
SYSTEM KITS |
- KIT SLC-96-36: SLC96 single
power system in 36 cabinet
- KIT SLC-96-80: SLC96 dual power systems in 80 cabinet
- KIT SLC-5-51: SLC5 single power system in 51 cabinet
- KIT SLC-5-80: SLC5 dual power systems in 80 cabinet
- KIT SLC-96-BULK: SLC96 rack upgrades for bulk power
- KIT SLC-5-BULK: SLC5 rack upgrades for bulk power
|
MECHANICAL
DIMENSIONS |
- Height: 87.6mm (3.45") (2RU) for 1V, 3V, 5V, and
5V2 shelf assemblies
- Depth: 304.8mm (12")
- Width: 584.2mm (23")
|
WEIGHT |
- Shelf Assemblies: 6.4kg (14lbs) or less
- V Series Rectifier: 3.2kg (7lbs)
|
AGENCY CERTIFICATIONS
-
TELCORDIA: NEBS Level 3, NRTL Certified
-
UL: Canada/US UL60950/UL1801
-
VDE: EN60950
-
EMI/EMC: CISPR Class B conducted and radiated
|
|
|
